EKOPEL 2K-CLASSIC Shower Tray Coating. Complete Kit. Curing Time 48 Hours.

EKOPEL 2K-Classic – the simple solution for durable shower tray resurfacing
Your shower tray is rusty, scratched, or damaged? With EKOPEL 2K-Classic, it looks like new again – easy, reliable, and completely odourless. Our premium shower tray coating is suitable for all materials, including cast iron, steel, and fibreglass.

Why choose EKOPEL 2K-Classic?
✔ 48 hours curing time – perfect for those who aren’t in a rush.
✔ 90 minutes pot life – plenty of time to apply the coating carefully and without hurry – ideal for beginners too.
✔ Odourless – no strong fumes, no lengthy airing required.
✔ Environmentally friendly – free from harmful solvents and VOCs.

With 15 years of expertise in coatings, EKOPEL 2K-Classic guarantees strong adhesion on all surfaces – no cracking, no peeling. The special pouring technique ensures an impeccably smooth finish that rivals a brand-new shower tray.

Whether for your own home or a rental property – with EKOPEL 2K-Classic you save the cost of an expensive shower tray replacement by choosing a proven, long-lasting, and tough solution.

793,00 DKK

Taxes included. Shipping calculated at checkout.

1 complete kit = sufficient for 1 standard shower tray up to 90 x 90 x 15 cm.

Includes:

• EKOPEL 2K Classic Coating (Component A + Hardener)
• Surface cleaner for preparing the substrate
• Sandpaper for preparing the bathtub surface
• Wooden stirring stick for mixing the components
• Notched spatula for spreading the material on the tray base

Technical data:

• Total volume: 1.2 L (1.0 L resin + 0.2 L hardener)
• Coverage: 1 complete kit = sufficient for 1 standard shower tray up to 90 x 90 x 15 cm.
• Working time: approx. 90 minutes
• Ready for use after: approx. 48 hours

Additionally required or useful (not included in the kit):

• 1 disposable plastic cup 500 ml
• 1 disposable plastic cup 200 ml
• Painter’s tape for masking edges
• Protective sheeting for floor and bathtub front
• Bin bags
• Paper towels
• Screwdriver for removing the siphon cover
• Utility knife for removing old silicone seals
• Baking soda for cleaning
• Hairdryer to warm the surface if required
• Protective gloves
• Protective clothing or clothes you don’t mind getting dirty

EKOPEL 2K Classic is applied using a pouring method and self-levels on the surface. This creates a smooth, high-gloss finish without roller or brush marks.

Technical advantages:

• Suitable for one standard shower tray up to 90 x 90 x 15 cm.
• Working time: approx. 90 minutes after mixing
• Bathtub ready for use after approx. 48 hours
• Cleaning agents can be used after approx. 7 days

Suitable for:

• Cast iron bathtubs
• Steel bathtubs
• Fibreglass/acrylic bathtubs

Important for a successful result:

• Minimum temperature: +20 °C
• Ideal room temperature: +23–24 °C
• Heat bathroom 1 day before and 2 days after resurfacing

Shipping:

• Orders are processed within 1 business day
• Delivery time: approximately 1–7 business days, depending on the destination
• Secure packaging for sensitive 2K materials
• Tracking information provided immediately after dispatch
• Delivery within Germany, to other EU countries, as well as to the UK, Norway, and Switzerland
• For deliveries to other countries, please contact us before placing your order

Important Information:

• Please check the goods immediately upon receipt for completeness and any transport damage.
• Store the material in a dry place at room temperature.

Returns:

• Returns of unopened products are possible within 14 days
• Opened or used sets cannot be returned due to the nature of chemical 2K products

If you have any questions, our support team is happy to assist you.

Technical data sheet (PDF) → View PDF

Safety Data Sheet (SDS) → Available on request

Quick Guide (PDF) → View PDF

Detailed instructions (PDF) → View PDF

Care instructions for the bathtub (PDF) → View PDF

MADE IN EU

Made in Slovenia

Tested according to DIN EN 71-3

Free from heavy metals

Thick-layer coating

up to 0.5 mm on the walls and up to 5 mm on the floor

Strong adhesion

No peeling with proper application

Personal Support

We provide support for any application questions

How the EKOPEL Pouring Technique Works

See how you can resurface your shower tray with EKOPEL 2K Classic, Optimum, or Gold using the proven pouring technique in just a few hours.

Frequently Asked Questions

All EKOPEL 2K materials are specially formulated for resurfacing old bathtubs and are applied using a pouring technique. They create a smooth, thick, and durable surface with excellent adhesion.

EKOPEL 2K Classic cures in approximately 48 hours and is particularly suitable for DIY enthusiasts thanks to its longer working time.

EKOPEL 2K Optimum cures in about 24 hours and is perfect when the bathtub needs to be back in use more quickly.

EKOPEL 2K Gold also cures within around 24 hours and provides enhanced UV protection. If your bathroom has a window or the bathtub is exposed to sunlight, we recommend EKOPEL 2K Gold.

EKOPEL 2K is applied using a pouring method. The material flows evenly over the surface, creating an extra thick, smooth, and glossy coating.

EKOPEL Roll-On is applied in two layers using a roller. It is especially suitable when the drain cannot be removed or when an easier roller application is preferred. Roll-On can also be used on wall and floor tiles.

EKOPEL 2K is suitable for steel, cast iron, ceramic, fiberglass, and previously coated bathtubs.

For acrylic bathtubs, use is only recommended if the walls are stable and not flexible. If the surface moves or gives when pressed, we do not advise application.

For a standard bathtub up to 170 × 80 cm, you will need an EKOPEL 2K set with 2.4 L.

For larger bathtubs, we recommend an additional 1.2 L set.

For shower trays up to 90 × 90 cm, a 1.2 L set is usually sufficient. For larger shower areas, we suggest a 2.4 L set.

The EKOPEL 2K set already includes the main material and essential accessories.

In addition, you will need masking tape, protective sheeting or paper for the floor, a hairdryer or heat gun, a container with a capacity of about 400-500 ml, tools for removing or opening the drain, a knife or cutter, cleaning cloths, and a solvent for cleaning tools.

We also recommend wearing clothing that can get dirty.

Before application, the bathroom should be thoroughly cleaned. Remove dust from shelves, walls, ceiling, and surfaces to prevent particles from contaminating the new coating.

Take out towels, toiletries, and any loose items from the bathroom. Windows should remain closed during the process to keep dust and insects off the surface.

The room temperature should be maintained at least +20 °C starting one day before application and throughout the curing period.

The bathtub must be clean, dry, grease-free, and free of silicone, limescale, rust, and loose old paint.

All silicone residues must be completely removed, as the coating will not reliably adhere to them. Limescale deposits, rust spots, and loose old coatings must also be removed.

Deep damage, grooves, or chips over 1 mm should be filled with epoxy or polyester filler before coating and then sanded smooth.

Pour the entire component B into the bucket with component A. Mix the material thoroughly using the supplied wooden stick.

Stir carefully for about 10 minutes to ensure no unmixed residue remains at the bottom or sides. Then let the mixture rest for approximately 5 minutes, and stir again for about 5 minutes.

After that, the material is ready to be applied.

EKOPEL 2K is applied by pouring, not with a roller or brush.

Use a cup with a capacity of about 400-500 ml and pour the material evenly onto the edges and walls of the bathtub. The material flows slowly downwards, spreading across the surface.

This pouring method creates an exceptionally smooth, thick, and glossy coating.

If possible, we recommend removing the drain or at least covering the drain opening. This allows excess material to drain away cleanly.

If the drain cannot be removed, the drain opening must be carefully sealed. Cover the opening with paper, securely tape it off, and carefully cut the tape along the edges.

The overflow should also be removed or carefully taped off.

The room temperature should be at least +20°C. This temperature should be maintained one day before application, during processing, and throughout the curing period.

For easier application, we recommend warming Component A to around +30°C before use. You can do this by placing the bucket in warm water or storing it in a warm place the day before.

Temperatures that are too low can impair flow behaviour and significantly prolong the curing time.

At a room temperature of around +24 °C, the bathtub can be carefully used again after approximately 24 to 48 hours, depending on the product. At around +21 °C, we recommend waiting about 2-3 days before using the bathtub. Curing may take longer at lower temperatures. Bottles, soap containers, pets, as well as products containing dyes such as hair colour or coloured bath additives should only be introduced after approximately 7-14 days.

Small dust particles, insects, droplets, or surface irregularities can be carefully treated after curing.

Minor imperfections can be smoothed with fine sandpaper and then polished with polishing paste. For small scratches or damaged areas, we recommend a repair kit.

Deep damage should be repaired as soon as possible to prevent water from seeping beneath the coating.

Use mild bathroom cleaners without aggressive abrasives. Cleaners based on mild acids are generally suitable.

Avoid stiff brushes, abrasive sponges, and highly abrasive cleaning agents. Residues from hair dye, coloured bath additives, or cosmetic products should be removed immediately.

Proper care significantly extends the lifespan of the coating.

EKOPEL 2K is virtually odourless and contains no strong-smelling solvents. Any slight odour dissipates quickly.

The product has been tested according to DIN EN 71-3. However, we still recommend using standard protective gear such as gloves, safety goggles, and ensuring good ventilation during application.

Avoid contact with skin and eyes.

Cured material can generally be disposed of with regular household waste. Uncured leftover material should be treated as hazardous waste.

Liquid remnants can be mixed together and disposed of after they have fully cured.

Store the material in a dry, tightly sealed container at temperatures between +5 and +35 °C. The shelf life is 2 years from the production date.

The material has a shelf life of 2 years from the production date, provided it is stored dry, well sealed, and at temperatures between +5 and +35 °C. The product can be used within this period.

The lifespan of the new coating can last for many years with proper surface preparation, correct application, and regular maintenance.

The actual durability greatly depends on the surface preparation, application process, cleaning, and daily use.

Yes, EKOPEL 2K can be tinted using the appropriate EKOPEL colour pastes.

Add the colour to Component A before mixing with Component B. The required amount depends on the specific colour chart.

Alternatively, pre-tinted versions can be used when available.